{"title":"Pre-Cut Van Flooring","description":"\u003ch1\u003ePre-Cut Camper Van Flooring — 2tec2 \u0026amp; Lonseal\u003c\/h1\u003e\n\u003cp\u003eVan floors take more abuse than any surface in the build: grit tracked in from trailheads, dog nails, cooler drag, a 40-degree temperature swing every day, and constant flex from the chassis underneath. Residential laminate and click-lock vinyl plank fail here — they cup, crack at the seams, and telegraph every fastener. That's why our flooring collection is commercial-grade only: 2tec2 woven vinyl and Lonseal sheet vinyl, CNC-cut to the perimeter of your specific van. We stock pre-cut floors for the 2007+ Mercedes Sprinter (144, 170, 170 EXT, and 170 Dually), the 2015+ Ford Transit (148, 148 EXT, 148 Dually), and the 2014+ RAM ProMaster. The cut follows the cargo floor where it meets the wall or the doors, so you drop it in, bond it down, and you're done — no cardboard templates, no crawling around with a utility knife, no seam in the middle of your galley. It's the same material and the same cuts we run in customer vans in Roanoke.\u003c\/p\u003e\n\u003ch2\u003eHow to Choose Van Flooring\u003c\/h2\u003e\n\u003ch3\u003e1. 2tec2 vs. Lonseal — this is the actual decision\u003c\/h3\u003e\n\u003cp\u003eBoth are professional-grade; they behave differently underfoot and under a knife.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003e2tec2 woven vinyl\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eLonseal sheet vinyl\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeel\u003c\/td\u003e\n\u003ctd\u003eTextile-like, textured, grippy\u003c\/td\u003e\n\u003ctd\u003eSmooth, resilient sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColorways we stock\u003c\/td\u003e\n\u003ctd\u003eInfinite Moonless Night, Infinite Planet, Stripes Moonless Night Blue\u003c\/td\u003e\n\u003ctd\u003eLonridge Smokey Black, Lonridge Moondust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdhesive\u003c\/td\u003e\n\u003ctd\u003eDAP All Purpose Spray Grade, DAP Weldwood, or P809\u003c\/td\u003e\n\u003ctd\u003eLonseal two-part epoxy (#650)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eTraction when wet, hiding dirt, a warmer look\u003c\/td\u003e\n\u003ctd\u003eMaximum cleanability, thinnest stack, wet-area work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe practical trade: 2tec2 is 5 mm, which is 2.5 mm more standing height gone and a slightly more forgiving surface for bare feet and dropped mugs. Lonseal keeps your floor stack thin and wipes down like an ambulance floor. If you're building a dog-and-mountain-bike van, we lean 2tec2. If you're building a surf\/dive van with a wet gear zone, we lean Lonseal.\u003c\/p\u003e\n\u003ch3\u003e2. Get the subfloor right first — this material is a top layer\u003c\/h3\u003e\n\u003cp\u003eNeither product is structural, and neither is a substitute for insulation. The stack we build:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRigid foam between the factory floor ribs (this is the layer \u003ca href=\"\/collections\/van-insulation\"\u003eThinsulate kits don't cover\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003ePlywood subfloor, fastened per your framing plan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA smooth, fine-finish plywood face\u003c\/strong\u003e — this matters more than people expect. Both products adhere to plywood, and any grain telegraph, patch ridge, or proud screw head will read straight through a 2.5 mm sheet.\u003c\/li\u003e\n\u003cli\u003ePre-cut 2tec2 or Lonseal, bonded with the correct adhesive\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eSand your seams and countersink every fastener. You will see them otherwise.\u003c\/p\u003e\n\u003ch3\u003e3. Use the specified adhesive — they are not interchangeable\u003c\/h3\u003e\n\u003cp\u003e2tec2 wants DAP All Purpose Adhesive Spray Grade, DAP Weldwood, or P809. Lonseal wants a two-part epoxy (#650). Using a spray contact adhesive under Lonseal or an epoxy under 2tec2 gets you bubbles, edge lift at the door thresholds, or a floor you cannot ever remove without destroying the subfloor. Do a dry fit first, roll from the center out, and let it cure before you set cabinets on it.\u003c\/p\u003e\n\u003ch3\u003e4. Trim, thresholds, and the edges nobody plans for\u003c\/h3\u003e\n\u003cp\u003eThe pre-cut perimeter is the whole point, but the edges still need a plan. Slider and rear door thresholds are the highest-wear inches of any van. Our \u003ca href=\"\/collections\/mercedes-sprinter-parts\"\u003eGoCode Sprinter Slider Door Threshold Trim Kit\u003c\/a\u003e covers the over-slider transition in ABS you can paint or upholster, and installs in about ten minutes; the D-Pillar (rear door threshold) kit does the same at the back. For Transit builds, AVC Rig floor trim kits are the recommended pairing.\u003c\/p\u003e\n\u003ch3\u003e5. Order early — this is a made-to-order product\u003c\/h3\u003e\n\u003cp\u003ePre-cut flooring is CNC-cut after your order is placed. Allow 7–10 business days before shipping or shop pickup, and longer if a colorway is out of stock (we'll tell you). Flooring goes in early in a build, so a late order stalls everything behind it. Free shipping on flooring in the lower 48.\u003c\/p\u003e\n\u003ch3\u003e6. Think about resale\u003c\/h3\u003e\n\u003cp\u003eThis is the least glamorous argument and the truest one. A van with a professionally cut commercial floor photographs like a shop build and holds value. A van with cracked laminate reads as a DIY project no matter how good the cabinetry is.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does \"pre-cut\" actually mean — is it cut around my wheel wells and cabinets?\u003c\/strong\u003e\nPre-cut refers to the perimeter of the floor, cut to match the cargo van floor where it meets the wall or doors. It's not cut around your specific cabinet layout, since we don't know your floor plan. That perimeter cut is the hard part — the interior cutouts for a shower pan or a heater duct are straightforward with a sharp knife.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I glue this directly to the van's steel floor?\u003c\/strong\u003e\nWe don't recommend it. Both products are specified to adhere to plywood, and gluing to bare corrugated steel means no insulation under your feet and a floor that follows every rib. Build the subfloor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich is more slip resistant when wet?\u003c\/strong\u003e\n2tec2's woven texture gives more grip and hides dirt better between cleanings. Lonseal's smooth surface cleans faster but is slicker with wet feet. If you're stepping in off a rainy Blue Ridge trailhead every day, that texture earns its 5 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much floor height do I lose?\u003c\/strong\u003e\nThe finish floor itself is 5 mm (2tec2) or 2.5 mm (Lonseal). The real height cost is your foam and plywood stack — typically 1 to 1.5 inches. In a high-roof Sprinter that's fine; in a mid-roof Transit where you're counting inches of standing height, choose Lonseal and keep the plywood thin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you cut for dually and extended vans?\u003c\/strong\u003e\nYes. Sprinter options include 144\", 170\", 170\" EXT and 170\" Dually. Transit options include 148\", 148\" EXT and 148\" Dually. ProMaster is available for the common wheelbases. Choose in the dropdown; if your configuration isn't listed, call the shop before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I pick it up instead of shipping?\u003c\/strong\u003e\nIn-stock cut lengths and CNC cuts still need 7–10 business days of lead time before pickup. Once it's cut, yes.\u003c\/p\u003e\n\u003ch2\u003eRelated Collections\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/van-insulation\"\u003eVan Insulation\u003c\/a\u003e — the layer that goes under the subfloor\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/van-upholstery-fabric\"\u003eUpholstery Fabric\u003c\/a\u003e — match Marathon Tweed walls to your floor color\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/mercedes-sprinter-parts\"\u003eSprinter Van Parts\u003c\/a\u003e — slider and rear door threshold trim kits\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/ram-promaster-parts\"\u003eProMaster Van Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/swivel-seats\"\u003eSwivel Seats\u003c\/a\u003e — install swivels before the finished floor goes down\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@graph\": [\n    {\n      \"@type\": \"CollectionPage\",\n      \"name\": \"Pre-Cut Camper Van Flooring — 2tec2 \u0026 Lonseal\",\n      \"url\": \"https:\/\/campervanpartsrus.com\/collections\/van-flooring\",\n      \"description\": \"CNC pre-cut 2tec2 woven vinyl and Lonseal sheet vinyl flooring for Mercedes Sprinter, Ford Transit and RAM ProMaster van conversions.\"\n    },\n    {\n      \"@type\": \"BreadcrumbList\",\n      \"itemListElement\": [\n        { \"@type\": \"ListItem\", \"position\": 1, \"name\": \"Home\", \"item\": \"https:\/\/campervanpartsrus.com\/\" },\n        { \"@type\": \"ListItem\", \"position\": 2, \"name\": \"Flooring\", \"item\": \"https:\/\/campervanpartsrus.com\/collections\/van-flooring\" }\n      ]\n    },\n    {\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        { \"@type\": \"Question\", \"name\": \"What does pre-cut van flooring actually mean?\", \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"Pre-cut refers to the perimeter of the floor, CNC-cut to match the cargo van floor where it meets the wall or doors. It is not cut around your specific cabinet layout.\" } },\n        { \"@type\": \"Question\", \"name\": \"What adhesive should I use for 2tec2 and Lonseal van flooring?\", \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"2tec2 uses DAP All Purpose Adhesive Spray Grade, DAP Weldwood or P809. Lonseal requires a two-part epoxy adhesive (#650). They are not interchangeable.\" } },\n        { \"@type\": \"Question\", \"name\": \"Can I glue van flooring directly to the steel floor?\", \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"No. Both products are specified to adhere to plywood with a smooth, fine finish. Build an insulated subfloor first; gluing to bare corrugated steel leaves no insulation and telegraphs every rib.\" } },\n        { \"@type\": \"Question\", \"name\": \"How thick is 2tec2 compared to Lonseal?\", \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"2tec2 is 5 mm thick with a woven, textured surface. Lonseal is 2.5 mm thick and smooth, which keeps the floor stack thinner and cleans faster.\" } },\n        { \"@type\": \"Question\", \"name\": \"How long does pre-cut van flooring take to ship?\", \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"Flooring is CNC-cut after the order is placed. Allow 7 to 10 business days before shipping or pickup. Shipping is free in the lower 48 states.\" } }\n      ]\n    }\n  ]\n}\n\u003c\/script\u003e","products":[{"product_id":"2tec2-lonseal-pre-cut-van-flooring-2014-ram-promaster","title":"2TEC2 \/ Lonseal Pre-Cut Van Flooring - 2014+ Ram ProMaster","description":"\u003cp\u003e\u003cstrong\u003eCut to the 2014+ ProMaster floor outline — the widest floor of the three big platforms, and the one hand-templating punishes hardest.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ProMaster is the widest of the mainstream cargo vans, which is exactly why templating its floor by hand is such a miserable job: more area, more perimeter, more places for a hand-cut edge to be a quarter inch off. Having the outline CNC-cut before it arrives removes all of that.\u003c\/p\u003e\n\u003cp\u003eYou choose the material — 2TEC2 woven vinyl at 5 mm, or Lonseal sheet vinyl at 2.5 mm — and the wheelbase, and it is cut to the ProMaster floor where it meets the walls and doors.\u003c\/p\u003e\n\u003ch2\u003e2TEC2 or Lonseal? Pick before you order\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonseal is more viable on a ProMaster\u003c\/strong\u003e than on the other platforms, because the factory floor is flatter and a well-laid subfloor comes out genuinely level. At 2.5 mm it gives you back head height you would otherwise lose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2TEC2 if you want the textile look\u003c\/strong\u003e and the acoustic character of a woven surface. Five millimeters, warmer underfoot, more forgiving of a subfloor seam.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e159\" or 159\" EXT.\u003c\/strong\u003e Two cuts, and they are not interchangeable. Confirm yours before checkout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuy the matching adhesive with it.\u003c\/strong\u003e 2TEC2 and Lonseal use different systems and neither tolerates the other.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWheelbase and vehicle fitment\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRam ProMaster cargo van, 2014 and newer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheelbase options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e159\" and 159\" EXT — select in the drop-down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAdheres to plywood; a smooth, fine finish is recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFree shipping to all lower 48 US states\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eProMaster subfloors are commonly built up higher than Sprinter or Transit subfloors because the factory floor is flatter and builders take advantage of it. Whatever you build, the surface the flooring lands on needs to be smooth plywood.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2TEC2 thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLonseal thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCNC-cut to 2014+ Ram ProMaster floor dimensions, at your selected wheelbase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25–45 lb depending on wheelbase length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2TEC2 colors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInfinite — Moonless Night; Infinite — Planet; Stripes — Moonless Night Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLonseal colors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLonridge — Smokey Black; Lonridge — Moondust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2TEC2 adhesive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDAP All Purpose Adhesive spray grade, DAP Weldwood or P809\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLonseal adhesive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLonseal two-part epoxy or Lonseal #650\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCut\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eComputer numerically controlled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eCut to order. Allow 7–10 business days before shipping or pickup on any cut length or CNC cut of 2TEC2 product. If material is out of stock we will tell you the real lead time after the order is processed, not after you chase us.\u003c\/p\u003e\n\u003ch2\u003eWhat ships to you\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne CNC pre-cut floor in your chosen material, color and wheelbase\u003c\/li\u003e\n\u003cli\u003eAdhesive not included — must match the material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLaying it: adhesive choice is the whole job\u003c\/h2\u003e\n\u003cp\u003eThe ProMaster gives you the flattest starting point of the three platforms, so a good result here comes down to patience with the plywood rather than fighting the body. Get the sheets tight, countersink and fill every fastener, sand the joints, and vacuum twice — the second pass always finds sawdust the first missed.\u003c\/p\u003e\n\u003cp\u003eAdhesive is material-specific and unforgiving. 2TEC2 wants DAP All Purpose Adhesive spray grade, DAP Weldwood or P809. Lonseal wants Lonseal two-part epoxy or Lonseal #650. Buy the right one when you buy the floor.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCountersink and fill every subfloor fastener. On a flat ProMaster floor, a proud screw head is the only thing that will show.\u003c\/li\u003e\n\u003cli\u003eVacuum twice. Grit under a glued floor is permanent.\u003c\/li\u003e\n\u003cli\u003e2TEC2 adhesive: DAP All Purpose Adhesive spray grade, DAP Weldwood, or P809.\u003c\/li\u003e\n\u003cli\u003eLonseal adhesive: Lonseal two-part epoxy, or Lonseal #650.\u003c\/li\u003e\n\u003cli\u003eDry-lay against the slider and rear apertures before opening adhesive.\u003c\/li\u003e\n\u003cli\u003eRoll the entire surface after laying, working from the center outward.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eQuestions we get asked about this part\u003c\/h2\u003e\n\u003ch3\u003eWhat exactly does “pre-cut” mean?\u003c\/h3\u003e\n\u003cp\u003eIt refers to the perimeter: the outline is cut to match the ProMaster cargo floor where it meets the walls and doors. Holes for your cabinetry, your seat rails or your heater are still yours to cut, on site, once the layout is fixed.\u003c\/p\u003e\n\u003ch3\u003eThe ProMaster floor is nearly flat. Do I still need plywood?\u003c\/h3\u003e\n\u003cp\u003eYes. Both materials are specified to bond to plywood, and the plywood is also what your furniture fastens into. Gluing sheet vinyl to painted steel is not supported by either manufacturer.\u003c\/p\u003e\n\u003ch3\u003eIs it made after I order?\u003c\/h3\u003e\n\u003cp\u003eYes — nothing sits on a shelf pre-cut for a ProMaster. Allow 7–10 business days before it ships if the material is in stock, and we will contact you if the real lead time is longer.\u003c\/p\u003e\n\u003ch3\u003eDo I still need edge trim?\u003c\/h3\u003e\n\u003cp\u003eYes. A CNC-cut perimeter is accurate but it is still an exposed edge. A floor trim where the floor meets the wall hides the cut line and, more importantly, stops the edge peeling once feet start catching it.\u003c\/p\u003e\n\u003ch3\u003eThe ProMaster floor is nearly flat. Do I still need plywood?\u003c\/h3\u003e\n\u003cp\u003eYes. Both materials are specified to bond to plywood, and the plywood is also what gives you something to fasten furniture to. Gluing sheet vinyl directly to painted steel is not what either manufacturer supports.\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/collections\/van-life-parts\"\u003eVan conversion flooring, trim and finishing parts\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eSold and shipped by Campervan Parts R Us, the parts counter of Noke Van Co. — a working van conversion shop in Roanoke, Virginia. If you are unsure whether this fits your van, email us the year, model and wheelbase and we will check it against a build sheet before you order.\u003c\/p\u003e","brand":"Campervan HQ","offers":[{"title":"Ram ProMaster 159\" \/ 2tec2 Infinite - Moonless Night","offer_id":50979593322781,"sku":"TF-2T2-H-MLN-PRO-159","price":1540.16,"currency_code":"USD","in_stock":true},{"title":"Ram ProMaster 159\" \/ 2tec2 Infinite- Planet","offer_id":50979593388317,"sku":"TF-2T2-H-PLANET-PRO-159","price":1540.16,"currency_code":"USD","in_stock":true},{"title":"Ram ProMaster 159\" \/ 2tec2 Stripes - Moonless Night Blue","offer_id":50979593453853,"sku":"TF-2T2-STR-MNB-PRO-159","price":1540.16,"currency_code":"USD","in_stock":true},{"title":"Ram ProMaster 159\" \/ Lonseal Lonridge - Smokey Black","offer_id":50979593519389,"sku":"TF-DR801-8 SMOKEY BLACK-PRO-159","price":1579.27,"currency_code":"USD","in_stock":true},{"title":"Ram ProMaster 159\" \/ Lonseal Lonridge - Moondust","offer_id":50979593584925,"sku":"TF-DR804-8 MOONDUST-PRO-159","price":1579.27,"currency_code":"USD","in_stock":true},{"title":"Ram ProMaster 159\" EXT \/ 2tec2 Infinite - Moonless Night","offer_id":50979593650461,"sku":"TF-2T2-H-MLN-159-EXT","price":1644.02,"currency_code":"USD","in_stock":true},{"title":"Ram ProMaster 159\" EXT \/ 2tec2 Infinite- Planet","offer_id":50979593715997,"sku":"TF-2T2-H-PLANET-159-EXT","price":1644.02,"currency_code":"USD","in_stock":true},{"title":"Ram ProMaster 159\" EXT \/ 2tec2 Stripes - Moonless Night Blue","offer_id":50979593781533,"sku":"TF-2T2-STR-MNB-159-EXT","price":1644.02,"currency_code":"USD","in_stock":true},{"title":"Ram ProMaster 159\" EXT \/ Lonseal Lonridge - Smokey Black","offer_id":50979593847069,"sku":"TF-DR801-8 SMOKEY BLACK-159-EXT","price":1684.54,"currency_code":"USD","in_stock":true},{"title":"Ram ProMaster 159\" EXT \/ Lonseal Lonridge - Moondust","offer_id":50979593912605,"sku":"TF-DR804-8 MOONDUST-159-EXT","price":1684.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/5831\/0941\/files\/TF-DR801-8_SMOKEY_BLACK-PRO-159.png?v=1772209711"},{"product_id":"2tec2-lonseal-pre-cut-van-flooring-2007-mercedes-sprinter","title":"2TEC2 \/ Lonseal Pre-Cut Van Flooring - 2007+ Mercedes Sprinter","description":"\u003cp\u003e\u003cstrong\u003eFits both NCV3 and VS30 Sprinters, in 144\", 170\" and 170\" EXT — the widest wheelbase coverage of the three platform kits.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprinters span two body generations that share a floor plan closely enough for one cut file: the NCV3 (2007–2018) and the VS30 (2019 onward). This flooring is cut for both, in every mainstream wheelbase, so most Sprinter builds are covered by a single drop-down selection.\u003c\/p\u003e\n\u003cp\u003eChoose 2TEC2 if you want woven vinyl that reads as textile underfoot and cleans like a hard floor, or Lonseal if you want a thinner sheet vinyl and every millimeter of interior height back.\u003c\/p\u003e\n\u003ch2\u003e2TEC2 or Lonseal? Pick before you order\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2TEC2 for a build that will be lived in.\u003c\/strong\u003e The 5 mm woven surface is quieter underfoot than sheet vinyl, which matters more in a Sprinter than people expect — the NCV3 and VS30 floor pans drum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonseal for a work-first build\u003c\/strong\u003e or where you are protecting head height. Thinner, flatter, and it wipes down to nothing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e144\", 170\", 170\" EXT or 170\" Dually.\u003c\/strong\u003e Four cuts. Get this right; a wheelbase mismatch is not a returnable error.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive is material-specific\u003c\/strong\u003e and must be ordered alongside. See the specification table for which goes with which.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWheelbase and vehicle fitment\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMercedes-Benz Sprinter, 2007 and newer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBody generations\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNCV3 and VS30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheelbase options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e144\", 170\", 170\" EXT, 170\" Dually — select in the drop-down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAdheres to plywood; a smooth, fine finish is recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFree shipping to all lower 48 US states\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eIf you have a 170\" and are unsure whether it is the standard or the EXT, measure from the rear of the slider opening to the rear door aperture — or send us the VIN and we will look it up.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2TEC2 thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLonseal thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCNC-cut to 2007+ Mercedes Sprinter floor dimensions, at your selected wheelbase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eListed by the manufacturer as 120–250 lb for this kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2TEC2 colors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInfinite — Moonless Night; Infinite — Planet; Stripes — Moonless Night Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLonseal colors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLonridge — Smokey Black; Lonridge — Moondust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2TEC2 adhesive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDAP All Purpose Adhesive spray grade or P809 (DAP Weldwood also suitable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLonseal adhesive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLonseal two-part epoxy or Lonseal #650\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCut\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eComputer numerically controlled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eCut to order. Allow 7–10 business days before shipping or pickup on any cut length or CNC cut of 2TEC2 product. If material is out of stock we will tell you the real lead time after the order is processed, not after you chase us. The listed 120–250 lb figure is the manufacturer’s stated weight for this listing; if precise shipping weight matters to you, ask us to confirm for your specific wheelbase and material before you order.\u003c\/p\u003e\n\u003ch2\u003eWhat ships to you\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne CNC pre-cut floor in your chosen material, color and wheelbase\u003c\/li\u003e\n\u003cli\u003eAdhesive not included — must match the material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLaying it: adhesive choice is the whole job\u003c\/h2\u003e\n\u003cp\u003eOn a Sprinter the door apertures are the tell. The slider sill and the rear step are where anybody looking closely at your build will look, and a pre-cut floor gets those lines right only if the subfloor beneath them ends where it should. Check the subfloor edge against both apertures before the flooring goes anywhere near them.\u003c\/p\u003e\n\u003cp\u003eAdhesive choice is material-specific: DAP All Purpose Adhesive spray grade or P809 for 2TEC2, Lonseal two-part epoxy or Lonseal #650 for Lonseal. On a 170\" EXT you are also gluing a very large piece in one go — have a second pair of hands and a plan for how the sheet gets positioned before it touches wet adhesive.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck your subfloor edge against the slider sill and the rear step before laying anything.\u003c\/li\u003e\n\u003cli\u003e2TEC2 adhesive: DAP All Purpose Adhesive spray grade or P809 (DAP Weldwood also suitable).\u003c\/li\u003e\n\u003cli\u003eLonseal adhesive: Lonseal two-part epoxy, or Lonseal #650.\u003c\/li\u003e\n\u003cli\u003eOn a 170\" or 170\" EXT, plan the positioning with two people before the sheet touches adhesive.\u003c\/li\u003e\n\u003cli\u003eWork above the adhesive’s minimum application temperature. Cold vans and adhesive do not mix.\u003c\/li\u003e\n\u003cli\u003eRoll the whole floor. Pressure makes the bond.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eQuestions we get asked about this part\u003c\/h2\u003e\n\u003ch3\u003eWhat exactly does “pre-cut” mean?\u003c\/h3\u003e\n\u003cp\u003eIt means the perimeter is machined to the Sprinter floor outline — the wall lines and the door apertures. Furniture cut-outs are not included, and should not be: you want those cut in the van once the layout is final.\u003c\/p\u003e\n\u003ch3\u003eDoes it go straight onto the metal floor?\u003c\/h3\u003e\n\u003cp\u003eNo. It adheres to plywood with a smooth, fine finish. Your Sprinter subfloor — insulation or foam, furring, then ply — is a prerequisite, not an optional extra.\u003c\/p\u003e\n\u003ch3\u003eWhen will it actually ship?\u003c\/h3\u003e\n\u003cp\u003eThese are cut to order, so plan on 7–10 business days before shipping or pickup, assuming stock. Order it early in the build rather than the week you want to lay it.\u003c\/p\u003e\n\u003ch3\u003eWhat finishes the perimeter?\u003c\/h3\u003e\n\u003cp\u003eAn edge trim where the floor meets the wall. It hides the cut line and protects the edge — particularly at the slider sill, which takes more foot traffic than anywhere else in the van.\u003c\/p\u003e\n\u003ch3\u003eDoes the same cut fit an NCV3 and a VS30?\u003c\/h3\u003e\n\u003cp\u003eYes — this listing covers both generations. The cargo floor plan between the two is close enough that one cut file serves, which is why you select wheelbase rather than model year.\u003c\/p\u003e\n\u003ch3\u003eI have a 170\" Dually. Is that covered?\u003c\/h3\u003e\n\u003cp\u003eYes, it is one of the drop-down options. Select it explicitly — a dually and a single-wheel 170 are not the same cut.\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/collections\/van-life-parts\"\u003eVan conversion flooring, trim and finishing parts\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eSold and shipped by Campervan Parts R Us, the parts counter of Noke Van Co. — a working van conversion shop in Roanoke, Virginia. If you are unsure whether this fits your van, email us the year, model and wheelbase and we will check it against a build sheet before you order.\u003c\/p\u003e","brand":"Campervan HQ","offers":[{"title":"Mercedes Sprinter 144\" \/ 2tec2 Infinite- Planet","offer_id":50979595845917,"sku":"TF-2T2-H-PLANET-SPR-144","price":1332.44,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 144\" \/ 2tec2 Stripes - Moonless Night Blue","offer_id":50979595911453,"sku":"TF-2T2-STR-MNB-SPR-144","price":1332.44,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 144\" \/ 2tec2 Infinite - Moonless Night","offer_id":50979595976989,"sku":"TF-2T2-H-MLN-SPR-144","price":1332.44,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 144\" \/ Lonseal Lonridge - Smokey Black","offer_id":50979596042525,"sku":"TF-DR801-8 SMOKEY BLACK-SPR-144","price":1368.73,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 144\" \/ Lonseal Lonridge - Moondust","offer_id":50979596108061,"sku":"TF-DR804-8 MOONDUST-SPR-144","price":1368.73,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" \/ 2tec2 Infinite- Planet","offer_id":50979596173597,"sku":"TF-2T2-H-PLANET-SPR-170","price":1747.88,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" \/ 2tec2 Stripes - Moonless Night Blue","offer_id":50979596239133,"sku":"TF-2T2-STR-MNB-SPR-170","price":1747.88,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" \/ 2tec2 Infinite - Moonless Night","offer_id":50979596304669,"sku":"TF-2T2-H-MLN-SPR-170","price":1747.88,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" \/ Lonseal Lonridge - Smokey Black","offer_id":50979596370205,"sku":"TF-DR801-8 SMOKEY BLACK-SPR-170","price":1789.81,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" \/ Lonseal Lonridge - Moondust","offer_id":50979596435741,"sku":"TF-DR804-8 MOONDUST-SPR-170","price":1789.81,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" EXT \/ 2tec2 Infinite- Planet","offer_id":50979596501277,"sku":"TF-2T2-H-PLANET-170-EXT","price":1955.61,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" EXT \/ 2tec2 Stripes - Moonless Night Blue","offer_id":50979596566813,"sku":"TF-2T2-STR-MNB-170-EXT","price":1955.61,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" EXT \/ 2tec2 Infinite - Moonless Night","offer_id":50979596632349,"sku":"TF-2T2-H-MLN-170-EXT","price":1955.6,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" EXT \/ Lonseal Lonridge - Smokey Black","offer_id":50979596697885,"sku":"TF-DR801-8 SMOKEY BLACK-170-EXT","price":2000.35,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" EXT \/ Lonseal Lonridge - Moondust","offer_id":50979596763421,"sku":"TF-DR804-8 MOONDUST-170-EXT","price":2000.35,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" Dually \/ 2tec2 Infinite- Planet","offer_id":50979596828957,"sku":"TF-2T2-H-PLANET-170-DUAL","price":1955.61,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" Dually \/ 2tec2 Stripes - Moonless Night Blue","offer_id":50979596894493,"sku":"TF-2T2-STR-MNB-170-DUAL","price":1955.61,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" Dually \/ 2tec2 Infinite - Moonless Night","offer_id":50979596960029,"sku":"TF-2T2-H-MLN-170-DUAL","price":1955.6,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" Dually \/ Lonseal Lonridge - Smokey Black","offer_id":50979597025565,"sku":"TF-DR801-8 SMOKEY BLACK-170-DUAL","price":2000.35,"currency_code":"USD","in_stock":true},{"title":"Mercedes Sprinter 170\" Dually \/ Lonseal Lonridge - Moondust","offer_id":50979597091101,"sku":"TF-DR804-8 MOONDUST-170-DUAL","price":2000.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/5831\/0941\/files\/TF-2T2-H-PLANET-SPR-170.png?v=1772209712"},{"product_id":"2tec2-lonseal-pre-cut-van-flooring-2015-ford-transit","title":"2TEC2 \/ Lonseal Pre-Cut Van Flooring - 2015+ Ford Transit","description":"\u003cp\u003e\u003cstrong\u003eA floor cut to your Transit’s outline before it ships — so you skip the cardboard templates and go straight to adhesive.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTemplating a van floor by hand is a full day of cardboard, tape and swearing, and the result is only as good as your patience at hour six. This is the alternative: the perimeter CNC-cut to the 2015+ Ford Transit floor where it meets the walls and the door openings, in your choice of 2TEC2 woven vinyl or Lonseal sheet vinyl.\u003c\/p\u003e\n\u003cp\u003eIt is also a resale argument. Laminate click flooring in a van cracks, bows and lifts — van floors see temperature swings and chassis flex that a house floor never does. Both of these are commercial transport-grade surfaces that stay put and clean up.\u003c\/p\u003e\n\u003ch2\u003e2TEC2 or Lonseal? Pick before you order\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2TEC2 for most Transits.\u003c\/strong\u003e The Transit floor is ribbed, and a plywood subfloor over ribs almost always ends up with a slight waviness at the sheet joints. At 5 mm, 2TEC2’s woven-vinyl construction absorbs that. Lonseal, at 2.5 mm, will show it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonseal if height is critical.\u003c\/strong\u003e Half the thickness, half the head-height cost. Worth it in a low-roof or mid-roof Transit where you are counting inches at the bed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePick your wheelbase carefully.\u003c\/strong\u003e 148\", 148\" EXT and 148\" Dually are three different cuts and the wrong one is not returnable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder the adhesive at the same time.\u003c\/strong\u003e The two materials use completely different systems and there is no substituting one for the other.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWheelbase and vehicle fitment\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFord Transit, 2015 and newer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheelbase options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e148\", 148\" EXT, 148\" Dually — select in the drop-down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAdheres to plywood; a smooth, fine finish is recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended pairing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAVC Rig Ford Transit floor trim kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFree shipping to all lower 48 US states\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThe wheelbase you select drives the cut. Confirm yours from the door jamb sticker or the VIN, not from memory or from a listing you half-remember.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2TEC2 thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLonseal thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCNC-cut to 2015+ Ford Transit floor dimensions, at the width and length of the wheelbase you choose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25–45 lb depending on wheelbase length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2TEC2 colors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInfinite — Moonless Night; Infinite — Planet; Stripes — Moonless Night Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLonseal colors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLonridge — Smokey Black; Lonridge — Moondust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2TEC2 adhesive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDAP All Purpose Adhesive spray grade (also DAP Weldwood or P809)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLonseal adhesive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLonseal two-part epoxy (also Lonseal #650)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCut\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eComputer numerically controlled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eCut to order. Allow 7–10 business days before shipping or pickup on any cut length or CNC cut of 2TEC2 product. If material is out of stock we will tell you the real lead time after the order is processed, not after you chase us.\u003c\/p\u003e\n\u003ch2\u003eWhat ships to you\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne CNC pre-cut floor in the material, color and wheelbase you select\u003c\/li\u003e\n\u003cli\u003eAdhesive is not included and must match the material — see the specification table\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLaying it: adhesive choice is the whole job\u003c\/h2\u003e\n\u003cp\u003eThe Transit’s factory floor is ribbed, and the whole quality of this job is decided before the flooring ever comes out of the box. Your plywood has to bridge those ribs without deflecting, and the sheet joints have to be flush. Sand the joints, fill the screw heads, and run your hand over the whole floor before you accept it — if you can feel a step, the flooring will show it.\u003c\/p\u003e\n\u003cp\u003eThen the adhesive. 2TEC2 takes DAP All Purpose Adhesive spray grade, DAP Weldwood or P809. Lonseal takes Lonseal two-part epoxy or Lonseal #650. There is no crossover between them and substituting is how you get edge lift six months later.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFeel the whole subfloor by hand before you open anything. Any step you can feel will telegraph.\u003c\/li\u003e\n\u003cli\u003e2TEC2 adhesive: DAP All Purpose Adhesive spray grade, DAP Weldwood, or P809.\u003c\/li\u003e\n\u003cli\u003eLonseal adhesive: Lonseal two-part epoxy, or Lonseal #650.\u003c\/li\u003e\n\u003cli\u003eDry-lay and check the perimeter against the door apertures first. This is your last chance to catch a wheelbase mismatch.\u003c\/li\u003e\n\u003cli\u003eRoll the whole floor after laying. Pressure makes the bond, not time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eQuestions we get asked about this part\u003c\/h2\u003e\n\u003ch3\u003eWhat exactly does “pre-cut” mean?\u003c\/h3\u003e\n\u003cp\u003eThe perimeter is CNC-cut to the Transit cargo floor outline, where it meets the walls and the door openings. It is not a kit with holes cut for your furniture — it is the outline, done accurately, so nobody spends a Saturday on the floor with cardboard and a marker.\u003c\/p\u003e\n\u003ch3\u003eCan I glue it straight to the Transit floor?\u003c\/h3\u003e\n\u003cp\u003eNo. Both materials bond to plywood, and a smooth, fine-finish plywood is what they are specified for. On a Transit that means insulation or furring over the ribbed floor, then ply, then flooring.\u003c\/p\u003e\n\u003ch3\u003eHow long before it ships?\u003c\/h3\u003e\n\u003cp\u003eIt is made after you order. Allow 7–10 business days before shipping, assuming the material is in stock. If a longer lead time turns up once the order is processed, we will tell you.\u003c\/p\u003e\n\u003ch3\u003eWhat finishes the edge?\u003c\/h3\u003e\n\u003cp\u003eA floor trim kit. We recommend pairing this with the AVC Rig Ford Transit floor trim kits, which are made for the same floor outline. An accurate cut still wants an edge trim to hide the line and stop the perimeter lifting.\u003c\/p\u003e\n\u003ch3\u003eWhich is better for a Transit, 2TEC2 or Lonseal?\u003c\/h3\u003e\n\u003cp\u003eFor most Transit builds we lean 2TEC2, because at 5 mm it hides the small imperfections that appear where plywood sheets meet over the Transit’s ribbed floor. If your subfloor is a single flat sheet and you want to keep every millimeter of interior height, Lonseal is the better call.\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/collections\/van-life-parts\"\u003eVan conversion flooring, trim and finishing parts\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eSold and shipped by Campervan Parts R Us, the parts counter of Noke Van Co. — a working van conversion shop in Roanoke, Virginia. If you are unsure whether this fits your van, email us the year, model and wheelbase and we will check it against a build sheet before you order.\u003c\/p\u003e","brand":"Campervan HQ","offers":[{"title":"Ford Transit 148\" \/ 2tec2 Infinite - Moonless Night","offer_id":51849988997405,"sku":"TF-2T2-H-MLN-TRN-148","price":1332.44,"currency_code":"USD","in_stock":true},{"title":"Ford Transit 148\" \/ 2tec2 Infinite- Planet","offer_id":51849989030173,"sku":"TF-2T2-H-PLANET-TRN-148","price":1332.44,"currency_code":"USD","in_stock":true},{"title":"Ford Transit 148\" EXT \/ 2tec2 Infinite - Moonless Night","offer_id":51849989062941,"sku":"TF-2T2-H-MLN-148-EL","price":1644.02,"currency_code":"USD","in_stock":true},{"title":"Ford Transit 148\" EXT \/ 2tec2 Infinite- Planet","offer_id":51849989095709,"sku":"TF-2T2-H-PLANET-148-EL","price":1644.02,"currency_code":"USD","in_stock":true},{"title":"Ford Transit 148\" Dually \/ 2tec2 Infinite - Moonless Night","offer_id":51849989128477,"sku":"TF-2T2-H-MLN-148-DUAL","price":1644.02,"currency_code":"USD","in_stock":true},{"title":"Ford Transit 148\" Dually \/ 2tec2 Infinite- Planet","offer_id":51849989161245,"sku":"TF-2T2-H-PLANET-148-DUAL","price":1644.02,"currency_code":"USD","in_stock":true},{"title":"Ford Transit 148\" \/ 2tec2 Stripes - Moonless Night Blue","offer_id":51849989194013,"sku":"TF-2T2-STR-MNB-TRN-148","price":1332.44,"currency_code":"USD","in_stock":true},{"title":"Ford Transit 148\" \/ Lonseal Lonridge - Smokey Black","offer_id":51849989226781,"sku":"TF-DR801-8 SMOKEY BLACK-TRN-148","price":1368.73,"currency_code":"USD","in_stock":true},{"title":"Ford Transit 148\" \/ Lonseal Lonridge - Moondust","offer_id":51849989259549,"sku":"TF-DR804-8 MOONDUST-TRN-148","price":1368.73,"currency_code":"USD","in_stock":true},{"title":"Ford Transit 148\" EXT \/ 2tec2 Stripes - Moonless Night Blue","offer_id":51849989292317,"sku":"TF-2T2-STR-MNB-148-EL","price":1644.02,"currency_code":"USD","in_stock":true},{"title":"Ford Transit 148\" EXT \/ Lonseal Lonridge - Smokey Black","offer_id":51849989325085,"sku":"TF-DR801-8 SMOKEY BLACK-148-EL","price":1684.54,"currency_code":"USD","in_stock":true},{"title":"Ford Transit 148\" EXT \/ Lonseal Lonridge - Moondust","offer_id":51849989357853,"sku":"TF-DR804-8 MOONDUST-148-EL","price":1684.54,"currency_code":"USD","in_stock":true},{"title":"Ford Transit 148\" Dually \/ 2tec2 Stripes - Moonless Night Blue","offer_id":51849989390621,"sku":"TF-2T2-STR-MNB-148-DUAL","price":1644.02,"currency_code":"USD","in_stock":true},{"title":"Ford Transit 148\" Dually \/ Lonseal Lonridge - Smokey Black","offer_id":51849989423389,"sku":"TF-DR801-8 SMOKEY BLACK-148-DUAL","price":1684.54,"currency_code":"USD","in_stock":true},{"title":"Ford Transit 148\" Dually \/ Lonseal Lonridge - Moondust","offer_id":51849989456157,"sku":"TF-DR804-8 MOONDUST-148-DUAL","price":1684.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/5831\/0941\/files\/TF-C123_BLACK-TRN-148.png?v=1780690800"}],"url":"https:\/\/campervanpartsrus.com\/collections\/van-flooring.oembed","provider":"Noke Van Co","version":"1.0","type":"link"}