{"product_id":"nw-conversions-toyota-tacoma-11-gallon-wheel-well-water-tank-toy-11","title":"NW Conversions Toyota Tacoma 11 Gallon Wheel Well Water Tank (TOY-11)","description":"\u003cp\u003e\u003cstrong\u003eOnly 7.25 inches wide, shaped to hug the Tacoma’s passenger-side bed wheel well — and it comes with the brackets.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTruck bed water storage usually means a jerry can rolling around your gear. This is the alternative: a rotomolded 11-gallon tank contoured to the Tacoma’s passenger-side bed wheel well, 48\" long and just 7.25\" wide, so it disappears against the bed wall and leaves the floor clear.\u003c\/p\u003e\n\u003cp\u003eUnlike most tanks in this range, the mounting hardware is included — four stainless laser-cut brackets, 3\/8\" stainless hardware and 3\/8\" rivnuts. You supply the rivnut tool.\u003c\/p\u003e\n\u003ch2\u003eShould you buy this tank, or a different one in the range?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuy the TOY-11 if\u003c\/strong\u003e you have a second- or third-generation Tacoma and want plumbed water in the bed instead of jugs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck your drawer system first\u003c\/strong\u003e — it is designed to coexist with most common bed drawers and bed stiffener kits, but stack heights vary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLook at the galley tanks\u003c\/strong\u003e if you are building a camper shell interior rather than mounting against the bed wall.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfirmed fitment\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota Tacoma, second and third generation (2005–present)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePosition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePickup bed, over the passenger-side wheel well\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBed type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWorks with factory composite beds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAccessories\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFits with most common bed drawer systems and bed stiffener kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUse\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFresh or grey water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e48\" L × 16\" H × 7.25\" W, contoured over the wheel well\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight full\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApprox. 116 lb including water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBPA-free food-grade plastic, made in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIAPMO TS 4 certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePorts — tailgate end\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e(2) 1.5\" NPT + (2) 1\/2\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePorts — top\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e(1) 1.5\" NPT for fill or level sender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePressurization\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnpressurized — must be vented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThese tanks are not pressure vessels. They must be vented to atmosphere — a sealed tank will balloon on a hot day and collapse inward when the pump draws it down.\u003c\/p\u003e\n\u003ch2\u003eWhat ships to you\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(1) TOY-11 11 gallon rotomolded tank\u003c\/li\u003e\n\u003cli\u003e(4) Stainless steel laser-cut mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel 3\/8\" hardware\u003c\/li\u003e\n\u003cli\u003e3\/8\" rivnuts\u003c\/li\u003e\n\u003cli\u003eA rivnut installation tool is required and is \u003cstrong\u003enot\u003c\/strong\u003e included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstalling it: what actually happens\u003c\/h2\u003e\n\u003cp\u003eThis is the one tank in the range where the hardware is done for you, and it changes the job completely: instead of fabricating a cradle you are setting four rivnuts into the bed wall and bolting the brackets up.\u003c\/p\u003e\n\u003cp\u003eBuy or borrow a proper rivnut tool. Cheap plier-style setters struggle with 3\/8\" rivnuts in the gauge of steel a Tacoma bed uses, and a rivnut that spins in its hole is a very annoying thing to remove.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou need a 3\/8\" rivnut tool — not supplied, and worth the money.\u003c\/li\u003e\n\u003cli\u003eAll the working ports face the tailgate end, which keeps fill and draw accessible with the tailgate down.\u003c\/li\u003e\n\u003cli\u003ePrime and seal any bare metal you drill; a truck bed is a wet, salted environment.\u003c\/li\u003e\n\u003cli\u003eCheck clearance against your drawer system before you set the rivnuts, not after.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eQuestions we get asked about this part\u003c\/h2\u003e\n\u003ch3\u003eDoes the tank need a vent?\u003c\/h3\u003e\n\u003cp\u003eYes. It is designed to run unpressurized. Run a vent line from the top 1.5\" port up above the maximum fill level and out through the floor or a body vent. Skip it and the tank will deform on a hot day, then pull its walls in when the pump runs.\u003c\/p\u003e\n\u003ch3\u003eHow much weight am I adding to the van?\u003c\/h3\u003e\n\u003cp\u003eWater weighs roughly 8.34 lb per gallon, so 11 gallons is about 92 lb of payload once full, on top of the dry weight of the tank. Put that number in your build budget before you order rather than after — it is the most commonly forgotten figure in a van conversion.\u003c\/p\u003e\n\u003ch3\u003eDo I need to drill the truck bed?\u003c\/h3\u003e\n\u003cp\u003eYes. The brackets mount with 3\/8\" rivnuts, which means drilling the bed wall. Treat the bare metal before you set them — a drilled, untreated hole in a truck bed will rust.\u003c\/p\u003e\n\u003ch3\u003eWhat does IAPMO TS 4 certified mean?\u003c\/h3\u003e\n\u003cp\u003eIt is a plumbing standard for non-metallic water tanks administered by IAPMO. It tells you the tank has been tested for use in a water system, which matters if your build is ever inspected.\u003c\/p\u003e\n\u003ch3\u003eCan I return it if it does not fit?\u003c\/h3\u003e\n\u003cp\u003eNW Conversions accepts returns up to 90 days on this tank if it has not been installed or altered, in the original packaging with tracking provided. A 20% restocking fee applies and return shipping is the customer’s responsibility. Dry-fit before you drill anything.\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/collections\/van-life-parts\"\u003eVan water tanks and plumbing\u003c\/a\u003e — the rest of the NW Conversions range\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eSold and shipped by Campervan Parts R Us, the parts counter of Noke Van Co. — a working van conversion shop in Roanoke, Virginia. If you are unsure whether this fits your van, email us the year, model and wheelbase and we will check it against a build sheet before you order.\u003c\/p\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":50993510154525,"sku":"NWX0260","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/5831\/0941\/files\/109.png?v=1772654832","url":"https:\/\/campervanpartsrus.com\/products\/nw-conversions-toyota-tacoma-11-gallon-wheel-well-water-tank-toy-11","provider":"Noke Van Co","version":"1.0","type":"link"}